Appendix A Parameter List
A.1 System Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
705
● Allowable IP Address
• IP Address
• Subnet Mask
■ When using IPv6
● LAN
• Speed and Duplex
• Wake on LAN
Description Input the IP address (or the network address) for the remote storage system.
Up to 16 addresses can be registered.
Make sure to input the IP address (or the network address) and subnet mask in pairs.
Input condition/
Display contents
• Numeric characters
• 0 - 255
Description Input the subnet mask for the IP address (or the network address) of the remote storage
system.
Input condition/
Display contents
• Numeric characters
• 255.0.0.0 - 255.255.255.252
Description Select the communication speed and mode.
Input condition/
Display contents
• Automatic
• 1 Gbit/s
• 100 Mbit/s Half
• 100 Mbit/s Full
• 10 Mbit/s Half
• 10 Mbit/s Full
Description Select whether to "Enable" or "Disable" the WOL function (*1).
*1: The WOL function starts up the ETERNUS DX, which is connected to LAN, from
another server or a PC via network.
Input condition/
Display contents
• Enable
• Disable
This item is not displayed when an FST port is selected.
To Next Page
Loading...
