Fujitsu ETERNUS DX8700 S3 - Page 882

Appendix A Parameter List
A.4 Connectivity Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
882
A.4.6.9 Add LU QoS Group
For details about this function, refer to "4.7.14 Add LU QoS Group" (page 499).
For the factory default settings for this function, refer to "Appendix B Add LU QoS Group" (page 1001)
.
● LU QoS Group Setting
• Bandwidth Limit
A.4.6.10 Modify LU QoS Group
For details about this function, refer to "4.7.16 Modify LU QoS Group" (page 501).
● LU QoS Group Setting
• Bandwidth Limit
Description Select the maximum performance in IOPS (throughput value).
If the bandwidth limit is not to be configured (the bandwidth is not to be limited), select
"Unlimited".
Input condition/
Display contents
• Unlimited
• 15000 IOPS (800 MB/s)
• 12600 IOPS (700 MB/s)
• 10020 IOPS (600 MB/s)
• 7500 IOPS (500 MB/s)
• 5040 IOPS (400 MB/s)
• 3000 IOPS (300 MB/s)
• 1020 IOPS (200 MB/s)
• 780 IOPS (100 MB/s)
• 600 IOPS (70 MB/s)
• 420 IOPS (40 MB/s)
• 300 IOPS (25 MB/s)
• 240 IOPS (20 MB/s)
• 180 IOPS (15 MB/s)
• 120 IOPS (10 MB/s)
• 60 IOPS (5 MB/s)
Refer to "LU QoS Group Setting" (page 882) in "A.4.6.9 Add LU QoS Group" (page 882) for details.