CONTENTS
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
6.1 Removing jammed documents
6.2 Indications of operator panel for errors
6.3 Items to check before contacting the dealer where you
bought the scanner
6.4 Checking labels on the scanner
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
Symptom : The Function No. display indicates an alarm ("E" and any number or character) after the
scanner is powered ON.
Back to the trouble shooting index
(When the scanner is just installed on the place) Did you unlock
the shipping lock?
NO
Turn OFF the scanner and unlock the shipping lock, then turn
ON the scanner again.
Reference : "Getting Started" 2.1 Installing the scanner
YES
Does the Function No. display indicate any alarm after turning
ON the scanner again?
YES
The scanner operation is normal.
NO
If you cannot solve the problem after taking measures, check the
items in "6.3 Items to check before contacting the dealer where
you bought the scanner" and contact the dealer or an authorized
FUJITSU service provider.
All Rights Reserved, Copyright (C) PFU LIMITED 2003
To Next Page
Loading...
Need help?
General