CONTENTS
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
Appendix 1 Before using [Scan] button and [Send to] button
Appendix 2 Glossary (Not available in this manual.)
Appendix 1 Before using [Scan] button and [Send to] button
By setting the link of the application software to the [ Scan ] button and [ Send to ] button, you can launch the linked application by simply
pushing the button.
For Windows 98, Windows Me, Windows 2000 and Windows XP:
1. Select [ Control panel ] from the [ Start ] menu.
2. Select [ Property ] from [ Scanner & Cameras ].
3. Select the [ Event ] tab.
4. Select the event. For Windows XP, select event to be performed by the application from the [ Select event ] menu.
With this function, the next events can be selected.
Scan button (When clicking on [ Scan ] button)
Feeder loaded with paper (When document are loaded on the ADF)
Send to 1~9(When clicking the [ Send to ] button)
1 | 2 | 3
All Rights Reserved, Copyright (C) PFU LIMITED 2003
To Next Page
Loading...
