U41578-J-Z875-1-76 51
RAID wizard
Select Logical Drives -> Configuration -> View Progress to display the current
progress of the initialisation procedure.
● If you selected the Background Initialisation (BGI) option, the initialisation
can be started in two ways: (note: this information is valid for controller
version firmware 8.20 onwards).
a) Initialisation is started automatically when the LUN is accessed from the
host.
b) Select Logical Drives -> Configuration and click the
Background Initialize button.
● CAUTION
BGI is not permitted with firmware version 8.20, still not recommended for
firmware 8.57!
● BGI may fail, if a grown defect is found on a harddisk. So, BGI is strongly not
recommended for FibreCAT S80.
To Next Page
Loading...
