50 U41578-J-Z875-1-76
RAID wizard
When the reset has been completed, the initialisation procedure will begin. Here
is some useful information about initialisation.
● If you selected the Foreground Initialisation option, you will be able to view
the initialisation once it starts after the reset by selecting Logical Drives
Configuration. However, please be patient. It may take Spheras a while to
read this information from the controller.
● If Spheras is not responding, restart the Agent SB2500 manually!
● If for any reason it may be necessary to initialize the LUNs manually, you can
do this checking the foreground initialize radio button. There will be a simul-
taneous FGI of 8 LUNs at a time.
To Next Page
Loading...
