Fujitsu FP-1000 - 3-4. Recommended Thermal Paper

Copyright 2011 – FUJITSU ISOTEC LIMITED
FP-1000 Installation Guide-2 1.1.0.0
16 of 57
Procedures to confirm:
(1) Use the following procedures to open the property screen of for "FIT FP-1000 Raster."
For Windows 7/Windows Server 2008 R2
• Right-click the "FIT FP-1000 Raster printer," printer and then click [Printer Properties].
For Windows Vista/Windows Server 2008
• Right-click the "FIT FP-1000 Raster" printer, and then click [Run as administrator] 
[Properties]
.
* If you have logged on to Windows Server 2008 using the built-in administrator account,
right-click "FIT FP-1000 Raster," and then click [Properties].
For Windows XP/Server 2003/WEPOS/WEPOS2009/2000
• Right-click the "FIT FP-1000 Raster" printer and then click [Properties].
(2) On the "FIT FP-1000 Raster" property screen, click [Print Test Page].
(3) This prints the test page.
* If the test page does not print correctly, refer to "3.1.4 If the test page does not print."