Copyright 2011 – FUJITSU ISOTEC LIMITED
FP-1000 Installation Guide-2 1.1.0.0
23 of 57
b) Installation procedure:
(1) Select [OPOS Driver] in Select Driver and then click [Next].
(2) First connect the printer to your PC using your desired interface, then turn on the printer and
click [OK].
(3) Confirm the connection to the printer and then click [Yes].
(4) Make sure the printer is turned on and then click [Yes].
(5) Confirm the setup language is set to English and then click [OK].
To Next Page
Loading...
Need help?
General