Fujitsu FP-510 User Manual

37 / 125
(4) Set the separator to a position appropriate for the width of
the roll paper, as shown below.
Caution: Adjust the separator to the width of the roll paper. To use roll
paper with a width of 83 mm, remove the separator.
Caution: When using roll paper with a width of 58 or 60 mm, take care not
to set the separator at an angle.
Caution: When replacing the separator, set a paper width appropriate to
the print area, referring to Appendix C, "Special Modes."
(See "C-3 Setting Up the Printer" in Appendix C, "Special Modes.")
Separator setting in detail
80
ｍｍ
70
ｍｍ
60
ｍｍ
58
ｍｍ

Fujitsu FP-510 Specifications

General

Brand	Fujitsu
Model	FP-510
Category	Printer
Language	English