Fujitsu FP-510 User Manual

77 / 125
(4) DIP Switch
Note 1:
This switch is maintenance use. Please use all switches by OFF
setting.
No.
ON
OFF
1
-
Off (Fixed)
2
Settings Initialization
-
3
Settings Information
-
4
Self Test for LAN Board
-
Initialization of settings
1) Turn off the printer.
2) Set the DIP Switch No.2 “ON”.
3) Turn on the printer, and wait approximately 5 seconds until
completion of initialization.
4) Turn off the printer again.
5) Set the DIP Switch No.2 “OFF”.
Self test print of settings
1) Turn off the printer.
2) Set the DIP Switch No.3 and No.4 “ON”.
3) Turn on the printer, and Printer prints Self test.
4) Turn off the printer again.
5) Set the DIP Switch No.3 and No.4 “OFF”.
Caution: Be careful of handling DIP Switches.
4 3 2 1
ON

Fujitsu FP-510 Specifications

General

Brand	Fujitsu
Model	FP-510
Category	Printer
Language	English