Getting started
Horizontal op erating position
Proceed as follows to operate the device in the h orizontal operating position:
HorizontaloperatingpositionOperatingpos ition,horizon talBasefeet
► Disconnect the cables if re quired.
► Place the device on its upper side on a sturdy, flat and clean surface.
► Position the ba se feet on the underside of th e d evice.
1
1
1
1
► Screw on the base feet with the screws (1).
► If necessary, reconnect an y c ables that were previously disconnected.
12 Fujitsu Technology Solutions
To Next Page
