Operation
Operation
Switch the device on
► If necessary, switch the monitor on (see the operating manu al for the monitor).
Device,Monitor,
► Switch on the device using the main
power switch located on the rear of the device (if present).
► Press t he ON/OFF switch on the front of the device.
The power-on indicator lights gr
een and the device is started.
Switching off the device
► Shut down the operating syste m in a defined manner. In Windows: via the
Start menu and the Turn Off Computer function.
Device,Monitor,
► If the operating system does not au
tomatically switch the device into energy-saving mode or
switch it off, press the ON/OFF sw
itch. Warning, this could lead to a loss of data!
If the device is in standby, it consumes a minimum of energy.
► Switch the device off at the main swi
tch (if present).
The device no longer uses any power.
The main switch and the ON/OFF switch do not disconnect the device
from the mains voltage. To completely disconnect from the mains voltage,
remove the power plug from the power socket.
► If necessary, switch the monitor
off (see the operating m anua l for the m onitor).
Open BIOS Setup
BIOS-Setup
► When the system starts, press the
F2
key (several times if necessary).
BIOS Setup will be started. Se lec
t one of the tab s to access other setting options in BIOS Setup.
PXE system boot
PXEsyst emboo t
► Switch the device on with th e ON/OFF switch.
► When starting the system, press the
F12
key several times.
The boot menu is displayed.
► Select the desired boot option.
18 Fujitsu Technology Solutions
To Next Page
