POINT
The A: drive letter will never be removed
from the "My Computer” and "Windows
Explorer” folders, because the floppy
drive is not considered a removable
device by Windows.
Section Three
56
POINT
Due to the special design and configura-
tion of the Iomega Zip 100 drive the
'ToolTip Balloon' identifier may vary.
Please consult the documentation that
comes with your Optional Iomega Zip
100 drive for specific information on how
to properly configure and use the device
with Agate Tioman software.
POINT
Due to the special design of the SuperDisk
120 Drive it can be configured as a
removable device as well as a standard
bootable floppy drive. Because of this
unique configuration the ‘ToolTip Balloon’
identifier for the SuperDisk 120 Drive may
vary. Please consult the documentation
that comes with your Optional SuperDisk
120 Drive for specific information on how
to properly configure and use the device
with Agate Tioman software.
Removing and Inserting Devices
1. Close any open files on the removable
device(s) that you plan to eject from
the computer.
2. Right-click on either 'Tioman Taskbar Icon'
to display its menu.
3. Select the 'Swap Devices' menu. (You can
also select the 'Properties' menu item to
bring up the 'Device Bay Properties' window
where you can activate the 'Swap Devices'
button from the 'Bay 1' or 'Bay 2' property
sheets or you can simply double-click either
'TaskBar Icon' to bring up the 'Device Bay
Properties' window)
4. The 'Agate Tioman' window will pop up and
display the following message: It is now
safe to remove and insert devices
in either Multi-function Bay.
After you have completed device
swapping, click the OK button.
5. You can now safely remove both devices
from both bays or one device from either bay
without damage to the computer or
the device(s).
6. References to both devices' drive letters listed
under 'My Computer' and 'Windows Explorer'
will automatically be removed even if you only
removed one device.
7. The 'Taskbar Icons' will display a blue and
white bar which indicates that you should
remove a device or devices if you haven't
already, and the 'ToolTip Balloons' will be
changed to read 'Remove xxx in bay' where
xxx refers to the device(s) you should
be removing. Note: Tioman does not require
that you actually remove a device or devices
To Next Page
Loading...
