First-time se tup of your device
First-time setup of your devic
e
First- time setu pGettingstarted
Please read the chapter "Important notes", Page 13.
If your device is equipped with a Windows operating system, the necessary
hardware drivers and sup p lied software are already pre-installed.
Before switching it on for the first time, connect the device to the AC voltage using
the AC adapter, see "
Connecting the AC adapter", Page 18. The AC adapter must
remain connected during the whole of the installation process.
A system test is performed when your device is first switched on. Various messages
can appear. The display may remain dark for a short time or may flicker.
Please follow the instructions on th e screen.
NEVER switch off your device during the first-time setup process.
On delivery, the battery can be found in the battery compartment or in the accessories kit.
The battery must be charged if you want to operate y our device using the battery.
When used on the move, the built-in ba ttery pro vides the device with the necessary power. You
can increase the operating time by using the available energy saving functions.
For instructions on how to connect external devices (e.g. mouse, printer) to your
device, please r efer to the operating ma nual for your device.
Unpacking and
checking the device
If you find that damage has occurred during transport, please notify
your local sales outlet immediately!
► Unpack all the individual parts.
PackagingTransport
► Check your
device for any visible da m age which may have occurred during transportation.
You m ay ne
ed to reuse the packaging in the future, for example if
you need t
o ship your device.
Fujitsu 17
To Next Page
Loading...
