Working with the no tebook
Speaker a nd microphones
MicrophoneSpeakerSubwooferVolume con tro l
You can find information about the exact position of the speaker and microphones
in chapter "
Ports and operation co ntrols", Page 9.
Please refer to chapter "
Key co mbinat ions", Page 2 6 for information on setting the volume
and also enabling/disabling the speakers using key combinations.
If you attach an external microph one, the built-in microphone is disabled.
When you connect headpho nes or external speakers, the built-in speakers are disabled.
You can find inform ation on connecting headphones and a microphone in
chapter "
Connecting external devices", Page 54.
Wireless LAN/Bluetooth components
The installation of
wireless components not approved by Fujitsu will
invalidate the cer
tifications issued for this device.
Switching the wireless components on and off
► Press the butto
ntostarttheWirelessSelector.
The wireless indicator will illuminate when one or more wireless components are switched on.
If you switch off the wireless components, the wireless LAN antenna
and the Bluetooth will also be switched off.
You can act ivate and deactivate the installed wireless components
individually using the WirelessSelector program
Pay attention to the additional safety notes f or devices with wireless components
provided in the "Safety/Regulatio ns" manua l.
Details on using a wireless LAN can be found in the online help system
included in the wireless LAN software.
You can find more information on how to use Bluetooth on the CD you
received with your Bluetooth software.
Further information on WLAN and Bluetooth
For further information about WLAN or Bluetooth, please refer to the
appendix of this Operating Manu al.
For W LAN specification s, see chapter "
WLAN specifications", Pa ge 79.
42 Fujitsu
To Next Page
Loading...
