Appendix
Using the Bluetooth Device
Bluetooth is integrated into the W ireless LAN module. The Bluetooth capabilities are Bluetooth
Basic, EDR and Bluetooth Low Energy (BT v4.0) operational modes.
What is Bluetooth?
Bluetooth technology is designed as a short-range wireless link between mobile devices, such
as laptop computers, phones, printers, and cameras. Bluetooth technology is used to create
Personal Area Networks (PANs) between devices in short-range of each other.
Proceed as follows to individually enable or disable wireless LAN or Bluetooth devices:
1. Switch on the WLAN/Bluetooth using the
button.
2. In the screen Modern Start, select the option Charm s > Settings
> Change PC Settings > Wireless.
3. Under Wireless > Wireless Devices, click on the switch Bluetooth to switch on Bluetooth.
Where to Find Informat ion About Bluetooth
For additional information about Blueto oth Technology, visit the B luetooth
Web site at: "
www.bluetooth.com".
FCC R adiation Exposure Statement
This system complies with the FCC limit values for radio frequency radiation in an uncontrolled
environment. The Bluetooth antenna is located at t he top edge of the LCD screen and is exempt
from the criteria for minimum distance because of its low pow er consumption.
The transmitter used in this system must not be operated together with other antennas or transmitters.
Canadian Notice
To prevent radio interference to licensed services, this system is designed for use in indoor s paces
/ i n buildings and not directly at window openings, to allow a maximum shielding.
Warranty
Users are not authorized to modify this product. Any modifica tions invalidate the warranty.
This equipment may not be modified, altered, or ch anged in any way without signed
written permission from Fujitsu. Unauthorized modification will void the equipment
authorization from the FCC and Industry Canada and the warranty.
Image Backup and Recovery Procedures
Thank you for purchasing a Fujitsu computer. Fujitsu is committed to bringing you
the best compu ting experience with your new system.
It is very important that you create DVD copies of your Recovery Image and Bootable Disk
before beginning to use your system. To do so, follow the instructions in the “Creating a
Backup of Bootable Disk and Recovery Image” section of this document.
It is also important that you create a copy of the software that is essential for your syst em to access the
internet (hereafte r called “essential access software”) to external writable media or an external drive.
To do so, follow the instructions in the “Crea ting a Backup of the System-Specific Software Drivers”.
Fujitsu 93
To Next Page
Loading...
