Settings in BIOS Setup Utility
Exiting B IOS Setup Utility
BIOSSetupUtility
You need to select the desired option in the Exit menu and activate it by pressing the E nter key:
Exit Saving Changes - save ch
anges and exit BIOS Setup Utility
► To save the current menu settings and exit the BIOS Setup Utility, select Exit Saving Changes and Yes.
The notebook is rebooted
and the new s ettings come into effect.
Exit Discarding Changes - Reje ct chan ges and
exit BIOS Setup Utility
► To discard the changes, select Exit Discarding Changes and Yes.
The settings in place when BIOS Setup Utility was called remain effective. BIOS
Setup Utility is terminated and the notebook is rebooted.
Load Setup Defaul
ts – load default values
► To copy the s tandard entries for all menus of th e BIOS Setup Utility,
choose Load Setup Defaults and Yes.
Discard Ch anges - Discard Changes without
exiting BIOS Setup Utility
► To discard the changes you have made, select D iscard Changes and Yes .
The settings in place when BIOS Setup Utility was called remain effective.
You can now make additional settings in the BIO S Setup Utility.
► IfyouwanttoexittheBIOS Setup Utility w ith these settings, select Exit Saving Changes and Yes.
Save Chan
ges - save chan ges without exiting
the BIOS Setup Utility
► To save the changes, select Save Changes and Yes.
The changes are saved. You can no w make additional settings in the BIOS Setup Utility.
► If you want to exit BIOS Setup Utility w ith these settings, choo se Exit Saving Changes and Yes.
Save changes and power off
► To save the changes and switch off your d evice, select Save Changes and Power Off and Yes.
The changes are saved. Your device is shut down.
70 Fujitsu
To Next Page
Loading...
