First-time setup of you r device
Choose a location
ChoosealocationSetupACadapter
Choose a suitable location for the device before setting it up. In doing
so, please follow these instructions:
• Never place the device or th e AC adapter o n a heat-sensitive surface.
The surface could be damaged as a result.
• Never place the device on a soft surface (e.g. carpeting, uph olstered furniture,
bed). This can block the air vents and cause overheating and damage.
• The und erside of the device heats up during normal operation. Prolonged contact
with the skin can become unpleasan t or even result in burns.
• Place the device on a stable, flat, non-slippery surface. Please note that the
rubber feet of the device may mark certain types of delicate surfaces.
• Keep other objects at least 100 mm / 3.97 inches away from the device
and its AC adapter to ensure ade quate ventilation.
• Never cover the ventilation openings of the device.
• Do not e xpose the device to extreme environmental conditions.
Protect the device against dust, humidity and heat.
Connecting the AC adapter
MakingreadytouseACadapter
Observe the safety notes in the en closed "Safety/Regulations" manual.
The supplied A C cable conforms to the requireme nts of the country in which
you purchased your device. Ma ke sure that the AC cable is approved for
use in the coun try in which you intend to u se it.
3
1
2
► Connect the AC cable (1) to the AC adapte r.
► Plug the A C cable (2) into a power outlet.
► Connect the AC adapter cable (3) to the
DC jack (DC IN) of the device.
18 Fujitsu
To Next Page
Loading...
