Troubleshooting and tips
The notebook does not start after switching it on
Notebook
Cause Troubleshooting
The battery is not in stalled correctly.
► Ch eck whether the battery is installed
correctly in its compartment.
► Switch the notebook on.
The battery is dead.
► Charge the battery.
or
► Insert a charge d ba ttery.
or
► Co nnect the AC adapter to the notebook.
The AC adapter is not connected properly. ► Ch eck whether the AC adapter is properly
connected to the notebook.
► Switch the notebook on.
The notebook stops working
NotebookEnding
Cause Troubleshooting
The notebo ok is in ene rgy saving mode. ► End energy saving mode.
An application program has caused the
malfunction.
► Close the application program or restart
the notebook (by restarting the operating
system or switching the device off and b ack
on again).
The battery is dead.
► Charge the battery.
or
► Insert a charge d ba ttery.
or
► Co nnect the AC adapter to the notebook.
The printer does not print
Printerdoe s notprint
Cause Troubleshooting
The printer is not switched on. ► Make sure that the printer is switched
on and ready for operation (refer to the
documentation supplied with the printer).
The printer is not connected correctly.
► Ch eck that the data cable connecting
the notebook to the printer is properly
connected.
The p
rinter driver is faulty or not co rrectly
inst
alled, or it is the w rong printer driver.
► Ch ec
k whether the correct printer driver is
load
ed (refer to the printer documentation).
74 Fujitsu
To Next Page
Loading...
