First-time setup of you r device
First-time setup of your devic
e
First- time setu pGettingstarted
Please read the chapter "Important notes", P age 14 .
If your device is equipped with a Windows operating system, the necessary
hardware drivers and supplied s oftware are already pre-installed.
Beforeyouswitchonthedeviceforthefirst time, connect it to the AC voltage
using the AC adapter, see "
AC adapte r connecting", Page 19. The AC adapter
must be connecte d during the entire installation p ro cess.
A system test is performed when your device is first switched on. Various messages
can appear. The display may remain dark for a short time or may flicker.
Please follow the instructions on the screen.
NEVER switch off your device during the first-time setup process.
On delivery, the battery can be found in the battery compartment or in the accessories kit.
The battery must be charged if you want to operate your device usin g the battery.
When used on the move, the bu ilt-in batte ry provides the device with the ne cessary power. You
can increase the operating time by using the available energy-saving functions.
For instructions on how to connect external devices (e.g. mouse, printer) to your
device, please refer to the operating manual for your device.
Unpacking and
checking the device
Should you discover any damage that occurred during transportation,
notify your local sales outlet immediately!
► Unpack all the individual p arts.
PackagingTransport
► Check your
device for any visible damage which may have occurred during transportation.
You may ne
ed the packaging in the future, if you need to transport your device.
18 Fujitsu
To Next Page
Loading...
