Connecting external devices
Connecting U SB devices
USBports
On the USB ports, you can connect e xternal devices that also have a USB port
(e.g. a DVD drive, a printer, a scanner or a modem).
USB devices are hot-pluggable. Th is means you can connect and disconnect
devices while your operating system is running.
USB 1.x has a maximum da ta transfer rate of 12 Mbit/s.
USB 2.0 has a data transfer ra te of up to 480 Mbit/s.
USB 3.0 has a data trans
ferrateofupto5Gbit/s.
Additional informati
on can be found in t he document ation for the USB devices.
► Connect the da ta cable to the
external device.
► Connect the data cable to a USB
port of the notebook.
Device drivers
USB devices will be automatically recognized and installed by your opera ting system.
62 Fujitsu
To Next Page
Loading...
