Removing and installing c omponents
during servicing
Attaching the cover
2
1
► Place the cover in the correct mounting position (1).
► Tighten the screw (2).
Finishing component removal
After you have removed or cha nged the system com ponents as you requ ired, please
prepare your device for operation again as follows:
► Install the battery ag ain (see "
Installing a battery", Page 35).
► Turn the notebook the right way up again and place it on a flat surface.
► Reconnect the cables that you disconnecte d before.
72 Fujitsu
To Next Page
Loading...
