First-time se tup of yo ur d evice
Selecting a location
SelectingalocationDeviceAC ada pter
Select a suitable location fo r the device before setting it up. F ollow
the instructions below w he n doing so:
• Never place the device or the AC adapter on a heat-sensitive surface.
The surface could be damaged as a result.
• Never place the device on a soft surface (e.g. carpeting, upholstered furniture,
bed). This can block the air vents and cause overheating and damage.
• The underside of the device heats up during normal operation. Prolonged contact
with the skin may become unpleasant or even result in burns.
• Place the device on a stable, flat, non-slippery surface. Please note that the
rubber feet of the device may ma rk certain types of delicate surfaces.
• Keep other objects at least 100 mm away from the device and its
AC adapter to ensure adequate ventilation.
• Never cover the ventilation slots of the device.
• Do not expose the device to extreme environmental conditions. Protect
the device from dust, humidity, and hea t.
AC adapter connecting
Preparingf or operationACadapter
Observe the safety notes in the enclosed "Safety/Regulations" manual.
The su pplied power cable conforms to the requ irements of the country in
which you purchased your device. Make sure that the power cable is approved
for use in the country in which you intend to use it.
3
1
2
► Connect the pow er c able (1) to
the AC adapter.
► Plug the AC cable (2) into a power outlet.
► Connect the AC adapter cable (3) to the
DC jack (DC IN) of the device.
Fujitsu 19
To Next Page
Loading...
