Troubleshooting and tips
The notebook cannot be started
Notebook
Cause Troubleshooting
The battery is not installed co
rrectly.
► Check whether the battery is installed
correctly in its compartment.
► Switch the notebook on.
The battery is de ad.
► Charge the battery.
or
► Insert a c harged battery.
or
► Connect the AC adapter to the notebook.
The power adapter is not connected correctly.
► Check whether the AC adapter is connected
correctly to the n otebook.
► Switch the notebook on.
The n otebook stops working
NotebookEnergy saving m ode
Cause Troubleshooting
Notebook is in energy saving mode. ► Leave energy saving mode.
An application program has caused the
malfunction.
► Close the application program or restart
the notebook (by restarting the operating
system or switching the device off and back
on again).
The battery is de ad.
► Charge the battery.
or
► Insert a c harged battery.
or
► Connect the AC adapter to the notebook.
The print
er does not print
Printerdoe s notprint
Cause Troublesh
ooting
The print
er is not switched on.
► Make sure
that the printer is switched
on and re
ady for operation (refer to the
documen
tation supplied with the printer).
The pri
nter is not connected correctly.
► Check that the data cable connecting
the notebook to the printer is properly
connected.
The printer driver is faulty or not correctly
installed, or it is the wrong p rinter driver.
► Check that the data cable connecting
the notebook to the printer is properly
connected.
► Check whether the correct printer driver is
loaded (refer to the printer documentation).
78 Fujitsu
To Next Page
Loading...
