Working with the no tebook
Inserting or removing an optical disk
InsertingRemoving
The notebook must be switched on.
2
1
► Push the insert/eject button (1).
The drive tray will open.
► Gently pull the drive tray (2) completely out.
► Place the optical disk in the drive tray with
the printed side facing upwards.
or
► Remove a n optical disk that has
been inserted.
► Push in the drive tray u ntil you
feel it lock into place.
Manual remo val (emergency removal)
CD/DVD:Manualremovalofdatacarrie rEmergency r emovalofda tacarrier
In the ev ent o
f a power failure or damage to the drive, you can remove the optical disk manually.
1
2
► Switch your
notebook off.
► Push a pen or a piece of wire (such as a
paperclip) firmly into the opening (1).
The drive t
ray is ejected. You can now pull
the drive t
ray (2) out of the drive.
38 Fujitsu