Using your notebook
2
► Press the Suspend/Resume button (1) to switch on the notebook.
The power-on indicator
of the notebook appears in the status indicator panel (2).
After switch-on a self-test (POST, Power On Self Test) is automatically carried out. Never
switch the notebook off during the self-test.
!
You can configure the Suspend/Resume button under
Start - Control Panel - Performance
and Maintenance - Power Options - Advanced
.
i
If you have assigned a password, you must enter this when requested to do so, in order to
start the operating system password. Detailed information can be found in "Security
functions" chapter.
16 A26391-K164-Z120-1-7619, edition 2
To Next Page
Loading...
