Fujitsu LIFEBOOK S Series - Switching on Notebook Via Port Replicator; Switching off Notebook Via Port Replicator

Using your notebook
Switching on notebook via Port Replicator
2
1
► Press the Suspend/Resume button (1) of the Port Replicator.
The power-on indicator (2) of the Port Replicator lights up.
After switch-on a self-test (POST, Power On Self Test) is automatically carried out. Never
switch the notebook off during the self-test.
!
Switching off notebook via Port Replicator
► Close all programmes and shut down your operating system (please see operating system
manual).
If the notebook cannot be shut down properly, press the Suspend/Resume button of the
Port Replicator for approx. four seconds. The notebook switches off. However, any data
which have not been saved may be lost.
i
46 A26391-K164-Z120-1-7619, edition 2