Settings in BIOS Setup
Operating BIOS Setup
Press the
F1 key to display help on the operation of BIOS Setup.
The description of the individual settings is shown in the right-hand window of the BIOS
Setup
.
i
You can revert to the default settings for the BIOS Setup menu you are currently in, by
using the F9 function key.
► Use the cursor key or to select the menu you wish to access to make changes.
► Press the Enter key.
The menu is displayed on the screen.
► Use the cursor key
or to select the field you wish to change.
► Press the Enter key to confirm your selection.
► Press the
ESC key to exit the selected menu.
► For future reference, make a note of the changes you have made (for example, in this manual).
Exiting BIOS Setup
To exit BIOS Setup, select the Exit menu from the menu bar. You can then decide which settings you
want to save. The Exit menu offers the following options.
You must mark the required option and activate it with the Enter key.
Exit Saving Changes
Select Exit Saving Changes and Yes to save the current settings and exit the BIOS Setup. The device is
rebooted and the new settings come into effect.
Exit Discarding Changes
Select
Exit Discarding Changes and Yes to discard the changes you have made. The settings which
were in force when
BIOS Setup was called remain effective. BIOS Setup is terminated and the device is
rebooted.
Load Setup Default
To revert all the menus of
BIOS Setup to the default entries, select Load Setup Default and Yes.
Discard Changes
To load the values of all the menus of
BIOS Setup that were in effect when BIOS Setup was called,
select
Discard Changes and Yes. If you want to exit BIOS Setup with these settings, select Exit Saving
Changes
and Yes.
Save Changes
To save settings without exiting
BIOS Setup, select Save Changes and Yes.
84 A26391-K164-Z120-1-7619, edition 2
To Next Page
Loading...
