Security functions
Configuring and using Security Panel
Enter4321
Security panel
Configuring Security Panel
When you put your notebook into operation for the first time, the Security Panel is not activated yet.
Assign the necessary passwords with the programs FJSECS.EXE (Supervisor password) and
FJSECU.EXE (User password). These programs are ready for installation in the folder AddOn and are
also provided on the "Drivers & Utilities" CD/DVD.
You require the User password each time you want to start your notebook (or want to return to your
working interface from the energy-saving mode). Should you forget your User password, you can
unlock the notebook with the Supervisor password and assign a new User password.
We recommend that you make a note of the security passwords and keep them in a safe
place.
!
If you should have forgotten both the User password and the Supervisor password you
cannot start your notebook any more. In this case you must call our Help Desk. The
deletion of security passwords is not a warranty case and is therefore subject to charge.
Back up your data on external data carriers at regular intervals.
To set the passwords, proceed in the following order:
Setting a supervisor password
The setup programme can be found under Start - AddOn.
► Double-click on the symbol to start the setup programme for
FJSECS.EXE.
The programme starts.
or
54 A26391-K164-Z120-1-7619, edition 2
To Next Page
Loading...
