Connecting external devices
Under all circumstances, please observe the safety notes provided in the "Important notes"
chapter.
Read the documentation on the external device before connecting it.
Do not connect or disconnect cables during a thunderstorm.
Do not pull on the cable when disconnecting a cable. Always take hold of the actual plug.
Follow the steps below in order, when connecting or disconnecting devices to your
notebook:
Connecting devices to notebook
1. Turn off all power and equipment switches.
2. Remove all power plugs from the mains outlets.
3. Connect all the cables to the notebook and the external devices.
4. Plug all data communication cables into the utility sockets.
5. Plug all power cables into the mains outlets.
Disconnecting devices from notebook
1. Turn off all power and equipment switches.
2. Remove all power plugs from the mains outlets.
!
3. Unplug all data communication cables from the utility sockets.
4. Disconnect all the cables from the notebook and the external devices.
A26391-K164-Z120-1-7619, edition 2 69
To Next Page
Loading...
