Fujitsu LIFEBOOK S Series - Configuring and Using Smartcard Reader

Security functions
Deactivating hard disk protection
To cancel a password (without setting a new password) run the following steps:
► Call
BIOS Setup and select the Security menu.
► Mark the
Hard Disk Security field and press the Enter key.
► Mark the
Set Primary Master Password field and press the Enter key.
With
Enter new Password you will then be asked to enter a password.
► Press the Enter key twice.
► Select the
Exit Saving Changes option in the Exit menu.
Your notebook will now restart and the password is cancelled.
With the password for the first hard disk you simultaneously deactivate the password for the second
hard disk.
► Select the
Exit Saving Changes option in the Exit menu.
The notebook reboots and there is no longer any password protection for the hard disk.
Configuring and using SmartCard reader
1
2
1 = PC card slot with SmartCard Interface 1 + 2 = SmartCard reader
2 = SmartCard holder
To use the SmartCard reader, you must install a SmartCard holder in your notebook. The SmartCard
holder is contained in the "Mobile Secure IT Suite", which is available as an accessory.
60 A26391-K164-Z120-1-7619, edition 2