Fujitsu LIFEBOOK S Series - Connecting Firewire Devices; Connecting an External Device to S-Video out; Activating the External TV; Projector

Connecting external devices
Connecting FireWire devices
External devices such as digital audio/video devices or other high-speed devices can be connected
to the FireWire port. The FireWire port operates at a speed of 400 Mbit per second.
FireWire devices are hot-pluggable. Therefore, the cables of FireWire devices can be
connected and disconnected with the system switched on.
i
Additional information is provided in the documentation of the FireWire devices.
► Connect this data cable of the external devices to the FireWire port of the notebook.
► Plug the power cable of the external device into the mains socket.
Connecting an external device to S-Video Out
You can connect a TV set or a projector to the notebook.
► Switch off the notebook and the external device.
► Connect the external device to the S-Video Out socket of your notebook.
► First switch the external device on and then the notebook.
Activating the external TV / projector
► To do this, select the TV/projector in the menu Start - Control Panel - Appearance and Themes -
Display - Settings - Advanced - Intel External Graphics.
► Click on
Apply.
You can set which key combination you use to switch over the screen output in the menu
Start - Control Panel - Appearance and Themes - Display - Settings - Advanced - Intel External
Graphics
.
i
You must end the playback program (e.g. DVD playback program) before you switch over
the screen output to a TV/projector.
76 A26391-K164-Z120-1-7619, edition 2