Working with the notebook
Module
ModulebayModules
The design of your notebook enables the flexible use of notebook batteries and drives. The
following mo dules can be operated in the module bay of your notebook:
• Seco nd battery
• Optical drive
• Second hard disk drive
• Empty plug-in unit (save weight)
• LIFEBOOK Bay Projector
Only use modules designed for your notebook.
Do not use force when installing or removing the module.
Make sure that no foreign objects enter the module bay.
You can swap modules during operation. This means you do not
need to switch off the notebook.
Log off the module via the corresponding symbol in the task bar.
The module can now be removed without any further actions being necessary.
Removing a m odule
1
2
ModuleDriveWe ight
Saver
► Slide the release mechanism (1) in the direction of the arrow and hold.
► Pull the module (2) out of the module bay.
Fujitsu 37
To Next Page
Loading...
