Security functions
Boot from Removable Media
With this BIOS feature, you can manage/control unauthorised booting of an operating
system from external media (e.g. USB stick, USB CD-ROM drive etc.) We recommend
that you configure the hard disk as the first boot medium in order to prevent a ccess
to your system by boot CDs and bootable media.
The condition for this BIOS f eature is that you have assigned at
least the supervisor password.
► Call up the BIOS Setup and select the Security menu.
► Highlight the Boot from Removable Media field and press the Enter key.
► Select the entry All (if you want everyone to be allowed to boot) or Supervisor Only (if you
only w ant the supervisor to be authorised to do this) and press the E nter key.
If you do not want to change any other settings you can exit the BIOS Setup .
► From the Exit menu, choose the option Exit Saving Changes.
► Press the Enter key a nd select Yes.
The notebook will restart and the settings w ill be adopted.
Owner Information (device-dependent)
The B IOS feature Ow ner Information enables you to enter up to 80 charact ers of text
which is displayed in the bottom left corner of t he screen before the operating system
boots up. You could use this feature for example to put your name a nd telephone
number on the notebook in case it is lost or stolen.
Requirements:
• You have been assigned at least the supervisor password.
•IntheBOOT menu, the Boo t time diagnostic screen option is set to enabled.
► Call up the BIOS Setup and select the Security menu.
► Highlight the Owner Information field a nd press the Enter key.
► Add the text you w o uld like to enter under Set Owner Information.
Setup Notice: Changes have been saved is displayed to confirm that the text has been saved .
► From the Exit menu, choose the option Exit Saving Changes.
► Press the Enter key a nd select Yes.
The notebook will restart and the Owner Information will be adopted.
56 Fujitsu