Connecting external devices
Connecting an external monitor
Connecting an external m onit
or to the notebook
You can connect a n external monitor to th e analogue VGA monitor connection of the
notebook. Screen output is limited to a maximum of two screens at any one time (see
"
Key combinations", Page 26, section "Toggle output screen").
MonitorVGA connection socketScreenportMonitorport
Analogue VGA monitor c onnection socket
► Switch off the notebook and the external monitor.
► Connect th e data
cable of the external mon itor to the monitor port of the notebook.
► First switch on the external monitor and then the notebook.
You can also use a key combination to s witch back and f orth between the external
monitor and the noteb ook’s LCD screen, see chapter "
Key combinations", Page 26.
You can display the same picture on the external monitor and the
notebook LCD screen simultaneously.
60 Fujitsu