Working with the no tebook
Installing a module
► Place the modu le in
to the module bay so that the contacts enter first.
► Push the module into the module bay until you feel it locking into place.
Optical drive
Opticaldrive
This product co
ntains a light emitting diode, classification according to IEC 60825
1:2007: LASER
CLASS 1, and must therefore not be opened.
Handling data carriers
Handling
Observe the
following guidelines when handling data carriers:
• Avoid touc
hing the surface of a data carrier. Only handle data carriers by their edges.
• Always store data carriers in their c ases. This will protect the data carrier against
being covered in dust, scratched or damaged in any other way.
•Protecty
our data carriers against dust, mechanical vibrations and direct sunlight.
• Avoid storing a data carrier in areas subject to high temperatures or humidity.
You can u
se data carriers w ith a diameter of 8 cm / 3.15" or 12 cm / 4.7" in the drive .
When us
ing a data carrier of lesser quality, vibrations and reading errors may occur.
38 Fujitsu
To Next Page
Loading...
