Connecting external devices
Connecting an external monitor to the Port Replicator
An analogue monitor is connected to the analogue VGA m onitor port, a digital monitor
to the DisplayPort or to the DVI-D monitor port on the optional Port Replicato r.
Monitor output is limited to a maximum o f two monitors at any o ne time (see "
Key
comb inatio ns", Page 26, section "Toggle output monitor").
MonitorVGA connection socketMonitor portMonitorport
Digital DisplayPort
Analogue VGA monitor port
Digital DVI-D monitor port
► Switch off the notebook and the external monitor.
► Plug the data cable of the external monitor into the monitor port.
► First switch on the external monitor and then the notebook.
You can also switch between the external mon itor and the LCD monitor of the
notebook, see chapter "
Key combinat ions", Pa ge 26.
You can display the same picture o n the external monitor and the
notebook LCD m onitor simultaneously.
Fujitsu 61
To Next Page
Loading...
