Security functions
Activating hard disk protection
► Call up the BIOS Setup and select th e Security menu.
If you have not yet assigned any BIOS passwords, you can defin e the s uperviso r HDD password
and, if desire d, the use r HDD password now (see ""
Secu rity functions", Page 51").
► Mark the Hard Disk Security field and p ress the Enter key.
► In th e Drive0 area mark the Set Master Password field and press the Enter key.
Enter new Password then appears and you are asked to ent er a password.
► Enter the password and p ress the Enter key.
Confirm new Password requires you to con firm the password .
► Enter the password again and press the Enter key.
Setup Notice: Changes have been saved is displayed to confirm that the
new password has been saved.
► To assign the pa ssword for the secon d hard disk (Drive1), go to the Drive 1 area a nd
select the field Set Master Password, then proceed in exactly the same way as for
setting up the password for the first hard disk (Drive0).
The field Password Entry on Boot is set to Enabled by default. You can exit the BIOS
Setup once you have finished chan ging the settings.
► Fr om the Exit menu, choose the option Exit Saving Changes.
► Press the Enter k ey and select Yes.
The note book reboots and your hard disk is now protected w ith a password. The system
will ask you to enter the password when the no tebook is restarted again.
Deactivating
hard disk protection
To ca ncel a password without setting a new one, proceed as follows:
► Call up the BIOS Setup and select th e Security menu.
► Mark the Hard
Disk Security field and press the Enter key.
► In th e Drive0 area mark the Set Master Password field and press the Enter key.
Yo u will be
initially requested to enter the old password by the Enter current Password prompt.
You will then be requested to enter a new password by the Enter new Password prompt.
► After entering the password, press th e Enter key three times.
► Fr om the E
xit menu, choose the option Exit Saving Changes.
► Press the Enter k ey and select Yes.
The note
book reboots, and passwo rd protection for th e hard disk is cancelled.
► To cancel the password for the second hard disk (Drive1), go to the Drive1 area
and select the field Set Master Password, then proceed in exactly the same way as
for cancelling the password for the first hard disk (Drive0).
Fujitsu 55
To Next Page
Loading...
