Removing and installing com ponents
during servicing
Installing a m emory module
2
a
1
► Insert the memory module with the contacts
and the recess ( a) f acing the slot ( 1).
MemoryexpansionMemorymodule
► Carefully push the memory module
downwards until you feel it click
into place (2).
Attaching the cover
1
2
1
2
► Place the cover into position, following the direction of the arrow (1).
► Fasten the cover in place with the screw (2).
► Complete the memory extension, see "
Finishing component removal", Page 68.
Finishing component removal
After you have removed or changed the system components a s you required, please
prepare your device for operation again as follows:
► Install the battery again (see "
Installing a battery", Page 36).
► Turn the notebook the right way up again and place it on a flat surface.
► R eco nnect the cables th at you disconnecte d before.
68 Fujitsu
To Next Page
Loading...
