Fujitsu lifebook t726 - Configuring the Wireless LAN; Configuring the WLAN Using Windows; Connection to the Network

Appendix
Configuring the Wireless LAN
The optional W LAN device can be co n figu red to establish w ireless network connectivity
using the software that is built into Windows. Support for most industry standard
security solutions is contained in this software.
Pre-defined parameters will be required for this procedure. Please consult w ith
your network administrator for these parameters:
Configuring the WLAN Usi
ng Windows
The WLAN device c an be configured to e stab lish wireless network connectivity using
the software that is built into Windows Vista. Support for most industry standard
security solutions is contained in this software.
Pre-defined parameters are required for this procedure. Consult your network
administrator for these parameters:
1. From the Modern Start screen, press
Windows
+
X
, then select Control Panel from the menu.
2. If the Control Pane
l is not in Classic View, select Classic View from the left panel.
Double-click the
Network and Sh a r ing Center icon.
3. Select Setup a new connection or network.
4. Depend ing upon w
hat type of connection you would like to make, make a selection. For
an infrastructu
re network, select Manually connect to a wireless network.
5. Enter the required information. It may be necessary to consult with your network
administrator for some of the information.
6. In the event yo
u require assistance, go to the Network and Sharing Center window (Control
Panel > Networ
k and Sharing Center), and t ype in releva nt keywords in the Search box.
Connection to the network
After you have configured your computer, you can connect to an active network
by performing the following steps:
1. Click on the WLAN ico n in the system tray.
2. Select Connect to a network.
3. Select a network f rom the list that appears, and click the Connect button.
Fujitsu 119