Working with t he notebook
Modules
ModularbayM odules
The design of your notebook enables the flexible use of notebook batteries and drives. The
following modu les can be operated in the modular bay of your notebook:
• Modular bay battery
• Optical drive
• Empty plug-in unit (weight saver)
Only use modules designed for your noteb ook.
Do not use force when installing or removing the module.
Make sure that no foreign objects enter the modular bay.
You can swap modules during operation. This means you do not
need to switch off the notebook.
To replace a module, simply click on the corresponding icon in the
task bar and then on Exit or
The module can now be removed without any further actions being necessary.
Removing a modular bay device
2
1
Modularbay deviceDriveWeigh tsaver
► Slide t he release mechanism (1) in the direction of the arrow and hold.
► Pull the modular bay device (2) out of the modular bay.
Fujitsu 51
To Next Page
Loading...
