Removing and in stalling components
during servicing
Attaching the cover
2
1
3
► Place the cover in the correct location (1).
► Slide the cover in the direction of the arrow (2).
► Tighten t he screw (3).
Finishing component removal
After you have removed or changed the system components as required, please
prepare your device for operation again as follows:
► Install the battery again, see "
Installing a battery", Page 49.
► Turn the notebook the right way up again and place it on a flat surface.
► Reconnect the cables that were p reviously disconnect ed.
88 Fujitsu
To Next Page
Loading...
