Fujitsu lifebook t726 - The Notebook Stops Working; The Printer Does Not Print; The Wireless Connection to a Network Does Not Work

Troubleshooting and tips
The notebook stops working
NotebookEnding
Cause Troub leshooting
The notebook is in energy savin
g mode.
► End energy saving mode.
An applicat ion program has ca
used the
malfunction.
► Close the application program or resta rt
the notebook (by restarting th e operating
system or switching the device off and back
on again).
The battery is dead.
► Charge the battery.
or
► Insert a charged battery.
or
► Connect the AC adapter t
o the notebook.
The printer does not print
Printerdoesnot p
rint
Cause Troub leshooting
The printer is not sw itched on. ► Make sure that the printer is switched
on and ready for operation (refer to th e
documentation supplied with the printer).
The printer is not connected correctly.
► Check that the data cable connecting
the notebook to the printer is properly
connected.
The printer driver is faulty or not correctly
installed, or it is the wrong printer driver.
► Check whether the correct printer driver is
loaded (refer to the printer documentation).
The wireless connection to a network does not work
Thewirele
ssconnection toanetwork doesnotwor k
Cause Troub leshooting
The wireless component is switched off. ► Switch the wireless component on (see
"
Switch ing the wireless components on and
off", Page 5 9).
The wireless component is switched on. Despite
this, the wireless connection to a n etwork does
not work.
► Check whe
ther the wireless connection is
enabled b
y the software.
► Further information on using the wireless
component can be found in the help files.
96 Fujitsu