Fujitsu lifebook t726 - The Cursor Does Not Correctly Follow the Stylus Movements; Stylus Input Not Working; The Notebook Does Not Start after Switching It on

Tro ubl eshooting and tips
The cursor does not correctly follow the
stylus movements
Cause
Troubleshooting
Stylus incorrectly calibrated. ► Calibrate the stylus as shown under
Hardware and Sound / Tablet PC Settings
in the C ontrol Panel, see "
Adjusting the
stylus", Page 36 and "Calibrating the stylus",
Page 36.
Stylus input not working
Cause
Troubleshooting
Incorrect driver installed.
► If your device is one which can only be
operated using the stylus, install the driver
for the standard model.
or
► If your device is one which can be
operated using the stylus and by finger,
install the drive r for the "Dual Digitizer"
model.
The notebook d
oes not start after switching it on
Notebook
Cause Troubleshooti
ng
The battery is
not installed correctly.
► Check whethe r the battery is installed
correctly in its compartment.
► Switch t he notebook on.
The battery is dead.
► Charge the battery.
or
► Insert a charged battery.
or
► Connect the AC adapter to the notebook.
The AC adapter is not connected properly. ► Check whether the AC adapter is properly
connected to the notebook.
► Switch t he notebook on.
Fujitsu 95