Connecting external d evices
Connecting an external monitor
An analog monitor is connected to th e analog external monitor port (VGA), a digital
monitor to the Display Port or to the DVI-D monitor port on the optional port replicator.
The display output is limited to a maximum of two monitors at a ny one time (see "
Key
combinations", Page 43, section "Toggle display output").
MonitorVGAsocketMonitorportMonitorport
Digital D isplay Port (on notebook or on optional
port replicator)
Analog externa l monitor port (VGA) (on
notebook or on optional port replicator)
Digital DVI-D monitor port (on optional port
replicator)
► Switch off the notebook and the external monitor.
► Plug the data cable of the external mon itor into the monitor port.
► First s witch on the external monitor and then the notebook.
You can also switch back and forth between the extern al monitor and the LCD
screen of the notebook, see chapter "
Key combination s", Page 43.
You can display the same picture on the external monitor and the
notebook LCD screen simultaneously.
76 Fujitsu
To Next Page
Loading...
