Fujitsu lifebook t726 - Installing the Software after the Recovery Image Is Restored

Appendix
Installing the Software after the Recovery Image is Restored
Note: The following steps are need ed only if you restore the image from the
DVD Recovery Disc Set that yo u pu rchased.
Installation of essential access software
1. Insert the bootable disc in your DVD drive.
2. Open the Drivers folder in the disc, and follow the steps in readme.txt. If there is not a Drivers
folder in the Bootable Disc, t he computer does not need the essential access software.
The recovery image already ha s the essential access software installed.
3. You can now connect to the Internet and download FSDM (Fujitsu Software Download
Manager) from the support site an d download all the software applicable to the
model and OS using FSDM if they are not downloaded yet.
Auto Installation support for the software downloaded from support website
1. Download FS DM (Fujitsu Software Download Manager) fro m the support site and download all
the drivers applicable to the model and OS using FSDM if they are not downloaded yet.
2. When the s oftware packages are dow nloaded from the web, it is important to
download the A uto Installer Software package and the model/language-specific
Readme file if you prefer to auto install the s oftware.
3. It is important to have the extracted Auto Installer software package folder
and Readme file in the same location as other software folders. Otherwise
auto-installation of the soft ware will not be supported.
4. Inside the Auto Installer software package, launch FjAutoinstall.exe as administrator.
5. Click Yes on the User Ac count Control dialog box. This will take some time to
process the software packages. A message will be displayed during this time
stating Please wait while the content is being processed.
6. If the E ULA is displayed for the Fujitsu Software Auto Installer, accept
the EUL A, otherwise continue.
7. The Fujitsu Software Auto Installer user interface will be launched providing the ability
to auto install the software dow nloaded from support site.
8. It is recommended that you install all the software in the listed order. You can
Select All, to in stall the software in the order listed.
9. Click the Install button to start the installation.
10. Afte r installing all the selected drivers, the Installation Results window is displayed. Click OK.
11. The You must restart the system fo r th e settin gs to take effect. Do you wish to
reboot now? message app ears. Select Yes.
12. T he system will now reboot.
128 Fujitsu