Security functions
Setting up the first system in a us er group or a stand-alone
system for use with SystemLock
Usergroups
► Start the device and call up BIOS Setup.
► From the Security menu, choos
e the option SmartCard SystemLock.
The following SmartCard SystemLock menu will be displayed:
Security
SmartCard SystemLock Item Specific Help
SmartCard SystemLock Not Installed
Install Single PC [Enter]
Install Group PC [Enter]
Installs the security
from a SystemLock Admin
SmartCard into this PC
without modifying any
data on the SmartCard.
A correct SmartCard is
required for a
permanent installation.
Enter PIN: [ ]
► Insert a new SmartCard in the read er a nd press Enter.
New SmartCa rds have a preset PUK (see above).
if you want to re-initialise a previously initialised S ma rtCard, you w ill need
to know the P UK which was assigned to it.
► Enter the PUK.
When the fo
llowing appears:
• ACCESS DENIED = You have entered an invalid PUK. After six failed attempts,
the SmartCard will be blocked and can no longer be used.
► Enter a ne
w PIN at the following prompt:
Enter new PIN:
Confirm n
ew PIN:
A numbe
r with 4 to 8 digits is acceptable for t he new PUK. For security
reason
s, we recommend that you change the PUK for every SmartCard,
and use
an 8-digit number each time.
70 Fujitsu
To Next Page
Loading...
