Security functions
► Re-enter the new PIN to con firm.
When the following appears:
• PIN/PUK do not match = You have confirmed the PIN incorrectly. You will be
requested to re-enter the new PIN and reconfirm.
Please wait a few seconds after confirming the new PIN: SystemLock is being installed.
The following message will be displayed if installation is successful:
Setup Notice
Changes have been saved
[Continue]
► Now press the Enter key. The SystemLock administration menu will be displayed:
Security
SmartCard SystemLock Item Specific Help
SmartCard SystemLock Installed
Uninstall: [Enter]
BIOS Recovery: [Allowed]
SmartCard and Pin [Always required]
SmartCard Initialization
Admin SmartCard [Enter]
SuperUser SmartCard: [Enter]
User SmartCard: [Enter]
Service SmartCard: [Enter]
SmartCard Configuration
Change PIN: [Enter]
Change PUK: [Enter]
Unblock SmartCard: [Enter]
Allows to deactivate
The smartcard security.
ATTENTION:
Always check the BIOS
password settings after
uninstalling
SystemLock.
NOTICE:
Reinstalling a SinglePC
implies re-initializing
all of your smartcards
► For secur
ity reasons, the preset PU K should always be changed before removing
the new S
martCard. To do this, under SmartCard Configuration, select the option
Change P
UK, press the Enter key and input the new PUK.
► First enter the preset PUK.
Enter t
he PUK:
New SmartC ards have a preset PUK (see a bove ).
Yo u will need to know the PUK assigned to the SmartCard if you want to
re-initialise a p reviously initialised SmartCard.
Fujitsu 71
To Next Page
Loading...
