First-time setup of your d evice
Switching on the device for the fi rst time
Switchingonforthefirst time
When you switch on the device for the first time, the supplied software is
installed and configured. Because this procedure must not be interrupted,
you should set aside enough time for it to be fully completed and connect
the device to th e mains using the mains adapter.
During the installation process, DO NOT restart the device unless
you are requested to do so!
To make it easier to use yo
ur device for the first time, the operating system
is pre-installed on the
hard disk.
1
► Slide the O N/OFF switch (1) to the right to switch on the notebook.
The ON/OFF button returns automatically to its original position.
► During installation, follow the instructions on screen.
If a Windows operating system is installed on your device, you will find more
information on the system and drivers, help programmes, updates, manuals etc. on
the device or on the Internet under "
http://www.fujitsu.com/fts/suppo r t/".
You can find information and help on the Windows operating system functions
on the Inte rnet at "
http://window s.microsoft.com" .
Fujitsu 19
To Next Page
Loading...
Need help?
General