Working with the notebook
Wireless LAN / Bluetooth / LTE radio components
(configuration dependent)
The installation of radio components not approved by Fujitsu will invalidate
the certifications issued for this device.
Depending on the device configura tion you ordered, your device will be
equipped with Wireless LAN, Bluetooth or LTE.
Switching the wireless components on and off
► To switch the radio c
omponents on or off, press the k ey combination
Fn
+
F5
.
WirelessLANWirelessLANBluetoothBluetooth
The wireless component indicator will illuminate when one or more wireless
components are switched on.
If you switch off the radio components, the Bluetooth and LTE m odules and the
wireless LAN transmission unit (antenna ) are also switched off.
Pay attention to the additional safety notes for devices with radio components
provided in the "Safety/Regulations" manual.
Details on using a Wireless LAN can b e found in the online help system
included in the W ireless LAN software.
For further information about LTE, please contact your service provider.
Setting up WLAN access
• Requirement: A WLAN must be available and you must h ave the
corresponding access information.
Information on configuring the WLAN access can be found in the
documentation for your operating system.
Fujitsu 55
To Next Page
Loading...
